Zurück zur Übersicht

TECHFIXBK BLOG

Windows 11 KB5077181: Severe Boot Loops and Network Failures

W

Windows 11 KB5077181: Severe Boot Loops and Network Failures

TechFixBK
||25 min read

The Windows 11 KB5077181 update is causing boot loops and network errors. Learn about the Secure Boot and DirectX conflicts and how to restore your PC.

Microsoft's February 2026 update triggers critical system instability, including infinite restarts and Wi-Fi connectivity loss for Windows 11 users.

Hook & Who This Is For (Intro)

Understanding the February 2026 Update Failures and How to Recover System Stability

You may have recently installed the latest security patch for Windows 11, only to find your computer trapped in an infinite cycle of restarts [1][7]. In other cases, systems successfully boot but suffer from a total loss of internet connectivity or are unable to authenticate with WPA3 Wi-Fi networks [11][15]. If your workstation is currently cycling through the Windows logo without reaching the login screen, you are likely encountering a known conflict within the February 2026 update [12][13].

This article provides a technical breakdown of the issues surrounding KB5077181, a cumulative update released on February 10, 2026 [4][15]. The following analysis is intended for users of Windows 11 versions 24H2 and 25H2 who are experiencing specific symptoms such as:

  • Boot loops or persistent black screens immediately following installation [4][9].
  • System Event Notification Service (SENS) errors preventing account login [8][14].
  • Network connectivity drops or DHCP failures despite active hardware connections [1][11].

This guide focuses exclusively on software-related instability triggered by this specific patch cycle [8][19]. It does not cover general hardware failures, unrelated blue screen errors, or issues affecting older versions of Windows 10.

TL;DR / What This Means for You

  • Critical Fault: The KB5077181 update is causing some systems to enter a boot loop of 15 or more cycles [4][15].
  • Primary Cause: Conflicts often stem from new Secure Boot certificates and third-party UEFI firmware incompatibilities [4][12].
  • Network Impact: Users may lose all internet access due to DHCP handshake failures [1][14].
  • Recommended Action: Experts suggest uninstalling the update via Windows Recovery Environment or the Control Panel and pausing automatic updates until a permanent fix is released [1][11].
  • Risk Note: Attempting manual registry edits or BIOS changes without a backup may lead to further system instability.

TL;DR / What This Means for You

The recent KB5077181 security update for Windows 11 has introduced a critical trade-off between essential security and system stability [7][9]. While it addresses 58 vulnerabilities, including six active zero-day exploits, it has also rendered many devices unusable due to severe boot failures [10][13][18].

  • Critical Boot Loops: Affected systems frequently enter an infinite restart cycle, often rebooting more than 15 times before failing to reach the login screen [2][7][12].
  • Widespread Connectivity Issues: Even if the system boots, users may encounter SENS (System Event Notification Service) errors and DHCP failures that result in a total loss of internet access despite active Wi-Fi connections [1][11][13].
  • Immediate Action Required: If your PC is stuck in a loop, you must uninstall the update via the Windows Recovery Environment (WinRE) using the command line: wusa /uninstall /kb:5077181 /quiet /norestart [1][3][12].
  • Pause Automatic Updates: After a successful uninstallation, experts recommend pausing Windows Updates in your settings to prevent the problematic patch from automatically reinstalling [4][9][13].
  • Risk vs. Reward: While the update provides necessary fixes for Nvidia GPU black screens and explorer.exe stability, the potential for Secure Boot certificate conflicts makes it a high-risk installation for non-essential systems until a revised version is released [2][6][12].

Background / Basics

The Windows 11 update KB5077181 is a cumulative security update released by Microsoft on February 10, 2026 [2][11]. This release was part of the monthly Patch Tuesday cycle, which typically delivers critical security patches and system improvements to all supported versions of Windows [2][12][27].

This specific update targets Windows 11 versions 24H2 (Build 26200.7840) and 25H2 (Build 26100.7840) [4][11][36]. Its primary goal is to address 58 security vulnerabilities, including six zero-day exploits—flaws that were already known to or used by attackers before a fix was available [11][12].

Core Technical Objectives

Beyond basic security patches, the update was designed to implement three major changes to the Windows environment:

Feature Objective
Secure Boot Deploys new certificates to replace those expiring in June 2026 [11][36].
WPA3 Support Fixes connectivity issues for devices using modern Wi-Fi security [12][36].
Gaming Updates eligibility checks for full-screen gaming experiences [12][36].

Understanding the Technical Terms

To understand the current issues reported with this update, it is helpful to define several core concepts:

  • Boot Loop: This is a critical error state where a computer restarts repeatedly before it can successfully load the Windows operating system or reach the login screen [4][12]. In the case of KB5077181, some systems are reportedly restarting more than 15 times in a row [4][11].
  • WPA3 (Wi-Fi Protected Access 3): This is the most recent security standard for wireless networks, providing enhanced encryption over the older WPA2 standard [12][36]. KB5077181 intended to fix a bug that prevented some devices from connecting to WPA3-Personal networks [36].
  • Secure Boot: A security standard that ensures a device boots using only software that is trusted by the Original Equipment Manufacturer (OEM) [11][36]. This update includes targeting data to safely roll out new Secure Boot certificates to prevent system integrity issues in the future [11][36].

While these updates are intended to provide essential security fixes, including patches for the Windows Kernel and Microsoft Defender, they appear to have introduced unexpected instability on certain hardware configurations [27][36].

Problem Explanation (What’s Going On?)

The release of the February 2026 cumulative update, KB5077181, has triggered a wave of critical system failures for Windows 11 users [1][4][13]. While intended as a routine security patch for versions 24H2 and 25H2, the update has instead rendered many devices unusable immediately following installation [4][13]. Reports indicate that the software conflict is widespread, affecting both individual home users and managed enterprise environments [27][28].

Systematic Startup Failures

The most severe symptom reported is a persistent boot loop where the computer restarts indefinitely [1][13]. Affected systems typically display the Windows logo briefly before triggering a new restart cycle, often repeating this process more than 15 times in a row [4][28]. In many cases, the system fails to reach the desktop entirely, leaving users trapped in a cycle of automated repairs that often prove unsuccessful [13][27].

For those who do reach the login screen, access is frequently blocked by a System Event Notification Service (SENS) error [1][4][26]. This error indicates that the operating system cannot communicate with vital background services, making it impossible to sign into user accounts [4][13]. Users have also documented several specific installation error codes, most notably 0x800f0983 and 0x800f0991, which appear when the update fails to integrate correctly with the existing system files [1][26].

Network and Connectivity Crises

Beyond startup issues, the update has caused a significant "Wi-Fi crisis" for those who manage to boot into the OS [1][4]. Users report that while their devices appear to be connected to a local network, they have no actual internet access [4][26]. This is likely caused by a failure in the DHCP handshake, which prevents the computer from receiving a valid IP address from the router [1][4][26].

Symptom Description Reported Frequency
Boot Loops Endless restarts (15+ cycles) before reaching login [4][28] High
SENS Error Login failure due to service communication breakdown [1][4] Moderate
Network Failure Active WLAN connection but no internet access (DHCP failure) [1][26] Moderate
Secure Boot Conflict BIOS-level errors forcing the use of Compatibility Support Module (CSM) [4] Low to Moderate

Real-World Impact

The practical impact of these errors is a total loss of productivity and significant system downtime [26][27]. Users relying on stable network connections for work or communication find themselves with "bricked" hardware that requires advanced recovery steps to restore [13][27]. For businesses, these failures result in measurable financial losses due to the time required for IT departments to manually roll back updates on affected workstations [12][27].

Root Causes / Analysis (Why Is This Happening?)

The instability surrounding the Windows 11 KB5077181 update appears to stem from a combination of security certificate migrations and driver-level conflicts. While Microsoft has addressed some of these factors, others remain under investigation or linked to specific hardware environments [2][27].

Confirmed Technical Root Causes

Industry documentation and Microsoft advisories have identified several primary triggers for the recent system failures:

  • Secure Boot Certificate Migration: Microsoft is currently rolling out new Secure Boot certificates to replace those set to expire in June 2026 [4][5]. On certain systems, this update process fails, leading to a "Something didn't go as planned" error or critical boot loops [15][30].
  • DirectX Kernel Corruptions: A bug in the dxgmms2.sys component—a core part of DirectX graphics memory management—has been confirmed to cause the KERNEL_SECURITY_CHECK_FAILURE error [2]. This typically results in a Black Screen of Death (BSOD) on specific GPU configurations [1][9].
  • WPA3 Protocol Incompatibility: Integration errors between recent updates and WPA3-Personal Wi-Fi networks have been identified [8]. This often causes devices to fail to connect or lose internet access despite showing an active WLAN connection [4][10].
  • Residual Update States: Microsoft has linked some boot failures to an "improper state" left behind by failed December 2025 security updates [2][11]. If those previous installations rolled back incorrectly, subsequent updates like KB5077181 may render the system unbootable [11].

Hypothesized and Reported Conflicts

Beyond confirmed bugs, technical analysis and community reports suggest additional environmental factors that may contribute to the instability:

  • Third-Party UEFI Software: Preliminary analysis suggests the boot loop issue may involve compatibility conflicts with certain third-party Unified Extensible Firmware Interface (UEFI) software [27][14]. These conflicts likely interfere with the update's security enhancements [27].
  • DHCP Handshake Failures: While not fully detailed by official sources, reports indicate that the network issues may be caused by a failure in the DHCP handshake process [4][26]. This prevents the system from receiving a valid IP address from the router [12].
  • SENS Initialization Errors: Some systems fail to load the System Event Notification Service (SENS) during boot [4][5]. This appears to prevent the user account from logging in properly, though the exact reason for the service failure is still being studied [12].

Confirmed vs. Speculative Analysis

Feature Status Impact
GPU (dxgmms2.sys) Confirmed [2] BSOD / Black Screen
Secure Boot Keys Confirmed [4] Boot Loops / BIOS Errors
WPA3 Wi-Fi Confirmed [1] No Internet Access
Third-Party UEFI Hypothesized [27] System Instability
SENS Service Reported [12] Login Failures

Technical reports suggest that the complexity of these issues is likely due to the wide variety of hardware and driver configurations across the Windows 11 user base [26]. While the February 2026 update was intended to resolve existing bugs, it appears to have introduced new conflicts for users with specific firmware settings [6][27].

Evidence & Reality Check

Reports from major technology publications confirm that the Windows 11 update KB5077181 is causing significant operational disruptions. Analysts at PCWorld have documented widespread "startup problems," noting that the February 2026 update triggers critical boot loops and login failures [1][7]. These findings are corroborated by community reports on platforms such as Reddit and Microsoft Answers, where users have described endless restart cycles and specific service errors [12][15].

Confirmed Technical Issues

While many user reports are still being categorized, Microsoft has officially acknowledged several specific bugs within the update cycle. According to official documentation and release notes, the following issues are confirmed:

Issue Type Symptom Status
Graphics BSOD KERNEL_SECURITY_CHECK_FAILURE related to dxgmms2.sys [4][9] Fix rolling out [9]
Network Connectivity failures involving WPA3 Wi-Fi [1][9] Confirmed [9]
Boot Failure Black screen with "Your device ran into a problem" [9] Resolved for some [11]
Security Secure Boot certificate conflicts during installation [8][15] Reported/Confirmed [12]

Industry Analysis

Analysts at BleepingComputer have highlighted that while KB5077181 was intended to resolve previous boot failures from December 2025, it appears to have introduced or exacerbated "improper states" on certain physical devices [9][11]. Technical experts suggest that the rollout of new Secure Boot certificates intended to replace expiring keys is a likely contributor to the current BIOS-level conflicts [8][15].

Industry reports indicate that the impact is particularly visible on systems with specific GPU configurations. Microsoft noted that certain setups experienced system errors involving dxgmms2.sys, a core DirectX graphics memory component, leading to the Black Screen of Death (BSOD) [4][9]. While a fix is reportedly rolling out for the graphics-related crashes, the broader boot-loop issues remain a primary concern for active users [1][6].

Note: Although Microsoft has addressed the Nvidia black screen and WPA3 issues in release notes, as of February 15, 2026, the company’s official health dashboard has not yet listed the infinite boot-loop reports as a "known issue" [12][15].

Evidence suggests these problems are not universal but are highly concentrated among users with specific hardware configurations or those transitioning from previously failed update states [9][15]. Analysts predict that additional "out-of-band" patches may be required if the current fix does not stabilize the broader user base [6].

Self-Check / Diagnosis

Identifying whether your system is suffering from the KB5077181 update requires a systematic check of your installation history and hardware behavior. Because this update affects different configurations in various ways, a "one-size-fits-all" symptom list does not exist.

1. Verify the Update Installation

The most direct way to confirm impact is to check your Windows update history. Navigate to Control Panel > Programs and Features and select View installed updates [11][12].

Alternatively, you can check through the Settings app under Windows Update > Update History [35]. Look specifically for the entry titled Cumulative Update for Windows 11 (KB5077181). If this package is listed and your PC is behaving abnormally, it is likely the cause of the instability.

2. Observe Restart Patterns and Boot Errors

A hallmark symptom of this update is a persistent boot-loop [1][35]. If your PC restarts repeatedly—often between 10 to 15 times or more—without reaching the login screen, it matches the reported behavior for this patch [4][26][30].

You should also look for specific error messages or codes during the startup process:

  • SENS Error: A notification stating the System Event Notification Service could not be reached [4][12][15].
  • Setup Errors: Messages such as Something didn't go as planned followed by an automatic rollback attempt [4][30].
  • Specific Codes: The appearance of error codes 0x800f0983, 0x800f0991, or KERNEL_SECURITY_CHECK_FAILURE [4][7][33].

3. Test Network and Wi-Fi Connectivity

If your computer boots but cannot access the internet, you may be experiencing DHCP handshake failures [1][4]. Check your connection status in the taskbar.

A common indicator is a device that remains connected to a WLAN or Ethernet network but displays a "No Internet" status [11][26]. While the update was designed to improve WPA3-Personal connectivity, many users report that Wi-Fi stability has degraded or failed entirely after installation [35][36].

4. Check Graphics and Interface Stability

System performance issues are frequently linked to this specific update, particularly on systems with Nvidia hardware. Monitor your device for the following:

  • Nvidia Black Screen: The monitor loses signal or remains black during or immediately after the login process [12][33][35].
  • Explorer Crashes: The explorer.exe process may freeze or crash, resulting in an unresponsive taskbar or a disappearing Start menu [12][33].
  • Secure Boot Violations: In some cases, the system may display a "Secure Boot Violation" or "Invalid Signature Detected" warning in the BIOS/UEFI [4][30].

If you identify two or more of these symptoms following the February 2026 update cycle, your system configuration is likely incompatible with the current build of KB5077181.

Solutions / What to Do

If your system is experiencing boot loops, login failures, or network issues after the February 2026 update, several recovery paths are available. Because Microsoft has not yet released a publicly available "Out-of-Band" patched update to replace KB5077181, manual intervention is often necessary to restore stability [4][6][14].

Short-Term Solutions: Uninstalling the Update

The most effective immediate resolution is the removal of the problematic patch. This can be achieved through the Windows interface or the recovery environment if the PC cannot reach the desktop.

Method 1: Via Windows Control Panel If you can still log in to your account, follow these steps:

  1. Open the Control Panel and navigate to Programs and Features [8][15][19].
  2. Select View installed updates on the left sidebar [1][6][14].
  3. Locate KB5077181, right-click it, and select Uninstall [4][11][19].
  4. Restart the computer when prompted.

Method 2: Via Windows Recovery Environment (WinRE) If the system is stuck in a boot loop or the login screen is broken, use the command-line tool:

  1. Enter the Recovery Environment by interrupting the boot process three times or using a recovery drive [10][19].
  2. Navigate to Troubleshoot > Advanced Options > Command Prompt [4][19].
  3. Enter the following command exactly: wusa /uninstall /kb:5077181 /quiet /norestart [1][8][14].
  4. Restart your device after the process completes.

Important: After uninstalling, it is highly recommended to navigate to Settings > Windows Update and select Pause updates [1][6][8]. This prevents Windows from automatically re-attempting the installation of the faulty patch [4][14].

Advanced Recovery and System Repair

In cases where the update has caused underlying file corruption or BIOS-level conflicts, further technical steps may be required.

Repairing System Files The installation process for KB5077181 can sometimes leave system files in an "improper state" [7]. Users can attempt to repair these files using the System File Checker:

  1. Open the Command Prompt as an Administrator [5][19].
  2. Type sfc /scannow and press Enter [1][4][15].
  3. This tool scans protected system files and replaces corrupted versions with cached copies [5][8][14].

BIOS and Secure Boot Workarounds Because the update introduces new Secure Boot certificates, some hardware configurations may experience BIOS-level failures [9][15].

  • Secure Boot Reset: Some users report that clearing or resetting Secure Boot keys in the BIOS can help, though reports indicate these keys may sometimes be deleted entirely during the failed update [4][9].
  • Compatibility Mode: As a temporary measure to allow booting, some individuals have switched to Compatibility Support Module (CSM) and disabled Secure Boot [4][9]. Note that this may impact the ability to run certain features that require UEFI.
Action Goal Risk Level
Uninstall KB5077181 Stops boot loops and restores Wi-Fi [1][14] Low
Pause Updates Prevents immediate re-infection [6][8] Moderate (misses other patches)
SFC Scan Fixes corrupted system files [5][15] Low
Disable Secure Boot Bypasses BIOS-related boot failures [4][9] High (reduces system security)

Long-Term Outlook

Microsoft’s internal advisories suggest that while KB5077181 was intended to resolve previous boot issues from December 2025, it has introduced new complications for specific 24H2 and 25H2 configurations [2][7][15]. For enterprise environments, Microsoft recommends contacting Microsoft Support for Business for specialized remediation scripts [3].

For home users, the most stable long-term strategy appears to be maintaining the system without this specific update until a verified fix is documented on the Windows Release Health dashboard [8][14]. If the system remains unstable after uninstallation, using the Media Creation Tool to perform a clean repair installation may potentially resolve deep-seated registry or file path errors [13].

Risks, Limits, and When to Stop

While manual fixes can often restore functionality, performing deep system repairs carries inherent risks. Users should be aware that technically complex interventions, particularly those involving the BIOS/UEFI or system registries, may lead to unintended consequences if not executed correctly [1][4].

Critical Risks and Warnings

The most significant risk involves the Secure Boot mechanism. Reports indicate that installation attempts of KB5077181 can lead to the deletion of Secure Boot keys in the BIOS, which in some cases are reported as unrestorable [1][4].

Warning: Forcing a manual shutdown during an active update or rollback process can potentially corrupt the file system further, leading to an unstable operating environment.

Technical analysis suggests that even after a successful uninstallation of the update, some systems may remain in an "improper state" if they were previously affected by failed updates from December 2025 [5]. This state can cause future updates to fail or render the system unbootable again [5].

When to Seek Professional Assistance

There are specific scenarios where home troubleshooting should cease to prevent permanent data loss or hardware complications:

  • Inaccessible BIOS/UEFI: If you cannot access the BIOS/UEFI settings to disable Secure Boot or switch to Compatibility Support Module (CSM) mode, do not attempt to force entry through hardware manipulation [1][4].
  • Persistent Black Screens: If the system continues to display a black screen or the message "Your device ran into a problem and needs a restart" even after using the wusa uninstallation command, a full system reinstallation or professional data recovery may be necessary [2][5].
  • Persistent SENS Errors: If System Event Notification Service (SENS) errors prevent any form of login after multiple recovery attempts, the underlying system database may be corrupted beyond simple repair [1][10].
  • Unresolved Hardware State: Devices that became completely unbootable before a fix was attempted may require "additional remediation" that goes beyond standard software commands [5][7].

Limits of DIY Repair

Self-repair tools like sfc /scannow or chkdsk are designed to fix minor file integrity issues but cannot restore deleted hardware-level security certificates or fix deep-seated network handshake failures caused by invalid DHCP configurations [4][13].

If you are an enterprise user, official documentation suggests contacting dedicated support channels rather than relying solely on community workarounds, as these systems may require specific tools to restore stability [7][10].

FAQ

Can I skip this update to avoid the reported boot loops?

While skipping updates is generally not recommended because KB5077181 addresses six actively exploited Zero-Day vulnerabilities [4][6], the current instability has led some users to pause the update. If a system is not mission-critical, industry reports suggest pausing the automatic update for approximately seven days until a more stable "Out-of-Band" fix is released [3][12]. This period allows for monitoring whether the reported Secure Boot certificate conflicts are resolved [10][14].

Does this issue also affect Windows 10 users?

Reports of severe boot loops and failed logins are primarily concentrated on Windows 11 versions 24H2 and 25H2 [10][12]. Windows 10 users receive a different patch, KB5075912, which includes similar security fixes and Secure Boot certificate updates but has not yet been widely linked to the same catastrophic boot failures [1][12]. However, some Windows 10 configurations may still experience general update installation errors or minor stability issues [1][6].

How can I fix the Wi-Fi connection problems caused by the update?

If you experience internet loss or DHCP failures despite an active connection, the most reliable current workaround is to uninstall the update [3][10]. You can do this via the Command Prompt in the recovery environment using the command wusa /uninstall /kb:5077181 /quiet /norestart [3][8]. Some reports suggest that reverting to WPA2-Personal from WPA3 settings may restore connectivity, as the bug specifically interferes with certain WPA3 handshakes [9][14].

What should I do if my PC is stuck in an infinite restart loop?

If the system restarts more than 15 times or hangs at a broken login screen, you must enter the Windows Recovery Environment (WinRE) [8][10]. This is typically accessed by interrupting the boot process three times in a row. Once in WinRE, navigate to "Troubleshoot" > "Advanced options" > "Command Prompt" to manually remove the patch [3][8]. If the BIOS has lost its Secure Boot keys, you may need to temporarily enable Compatibility Support Module (CSM) or disable Secure Boot to regain access [3][10].

Are there specific hardware configurations at higher risk?

Evidence suggests that systems with certain GPU configurations are particularly vulnerable to crashes involving dxgmms2.sys, leading to a KERNEL_SECURITY_CHECK_FAILURE [9][11]. While NVIDIA black screen issues were supposedly addressed in this patch, the fix itself appears to trigger instability on a wider range of hardware than initially predicted [6][9]. Systems using Virtual Secure Mode (VSM) have also been identified as potentially experiencing shutdown or hibernation failures [12].

Is there a risk of permanent hardware damage?

There are no verified reports of permanent physical hardware damage. However, unverified user reports indicate that the update can delete Secure Boot keys within the BIOS, making the system unbootable until settings are manually adjusted [3][10]. While these settings can usually be restored or bypassed by a technician, the loss of boot integrity data can be a significant technical hurdle for average users [10][14].

Summary / Key Takeaways

The Windows 11 KB5077181 update, released in February 2026, has introduced significant stability challenges for a variety of hardware configurations. While intended to provide critical security patches and new Secure Boot certificates, the update has instead triggered severe boot loops and connectivity failures for many users [4][9][10].

  • System Instability: The update is linked to infinite restart cycles, often requiring more than 15 reboots before failing at the login screen [4][11].
  • Root Causes: Technical analysis suggests the primary issues stem from compatibility conflicts with certain third-party UEFI firmware and changes to the Secure Boot architecture [3][4][10].
  • Network Failures: Users have reported a total loss of internet access due to DHCP handshake errors, even when a physical or Wi-Fi connection is active [4][11][15].
  • Primary Solution: The most effective immediate fix is to uninstall the update via the Windows Recovery Environment (WinRE) using the command wusa /uninstall /kb:5077181 /quiet /norestart [1][4][13].
  • Prevention: After removal, it is generally recommended to pause automatic updates temporarily to prevent the system from re-attempting the installation until a revised patch is released [1][6][13].

The current situation highlights the inherent risks of Patch Tuesday deployments. Although system updates are essential for maintaining security and addressing vulnerabilities like CVE-2026-20841, waiting several days before installing non-critical patches can potentially prevent major stability crises [12][15][35]. If a device becomes unbootable, manual remediation through recovery tools remains the only confirmed path to restoring functionality [2][7][19].

If you are unsure of how to proceed with command-line tools or recovery menus, it is usually cheaper to ask someone once than to fix a mistake later.

Quellen

[1] February's Windows 11 update is causing startup problems for users

[2] Windows 11 KB5077181 fixes boot failures linked to failed updates

[3] Emergency mode for Windows 11: How to rescue a temperamental system

[4] Endlos-Neustarts: Neues Windows 11 Update legt Rechner lahm

[5] Windows 10/11 Patch-Day Februar: Das gro�e Sicherheitsupdate ist da

[6] Microsofts Patch-Day schlie�t diese aktiv ausgenutzten Schwachstellen

[7] Media Creation Tool startet jetzt mit aktualisierter Windows-11-Version

[8] Fritzboxen: Hersteller bestätigt Fehler in FritzOS 8.20

[9] Microsoft says Windows 11 update causes BSOD on some GPU config, broke WPA3 W...

[10] Windows 11 KB5077181 fixes gaming bugs, Nvidia black screen, and performance ...

[11] Windows 11 KB5077181 boot loop fix: uninstall guide | tbreak

[12] Windows 11 KB5077181 Security Update Causing Some Devices to Restart in an In...

[13] Windows 11 Update KB5077181 Traps Users in Boot Loops

[14] Windows 11 February 2026 Patch: KB5077181 and KB5075941 fix zero-days, shutdo...

[15] How to check if Windows 11 has applied the new Secure Boot 2023 certificates ...

[16] Fix Windows 11 KB5077181 Install Error

[17] DISM and SFC

[18] Windows 11 Update KB5077181 Triggers Infinite Restart Loop on Some Devices

[19] Windows 11 KB5077181 boot loop issues on 24H2 systems fix for login failures ...

[20] How to Uninstall Windows Update (Windows 11 KB5077181)

[21] Windows 11 KB5077181 25H2 out with new features, direct download links for of...

[22] KB5074109 - Details, Issues, & Feedback - NinjaOne

[23] Windows 11 KB5077181 Update: New Features, Download, Issues, and Installation...

[24] bleeping computer CVE-2026-20841 : Why Everyone’s Searching It — and How to T...

[25] Windows 11 Update KB5077181 verursacht Startprobleme: Das können Sie tun

[26] Windows 11 Update KB5077181 - DAP IT-Solutions GmbH

[27] Windows 11 KB5077181 Update Causes Boot Loops, Network Failures - Microsoft I...

[28] Windows 11-Update führt zu massiven Problemen – diese Nutzer sollten es deins...

[29] Patchday: Windows 10/11 Updates (10. Februar 2026)

[30] Windows 11 24H2/25H2: Update KB5077181 verursacht Boot-Schleife

[31] KB5077241 Windows 11 25H2 / 24H2 [Manueller Download] als optionales Update F...

[32] Windows-11-Februar-Update kann für Bootschleife sorgen

[33] Windows 11: KB5077181 behebt Fehler beim Spielen, den schwarzen Bildschirm vo...

[34] Microsoft schließt sechs aktive Zero-Day-Lücken in Windows 11

[35] Windows 11 KB5077181 Update Released

[36] KB5077181 - Details, Issues, & Feedback - NinjaOne

[37] XFN 1.1 profile

[38] Windows Latest

[39] WinFuture News

[40] static.winfuture.de

[41] WinFuture.de (@winfuture.de)

Relevant Services

More from the Blog

Brauchen Sie Hilfe?

Wir reparieren Ihren PC oder Laptop schnell und zuverlässig.

Jetzt Reparatur anfragen